Atmos Jump Manual: Complete Setup, Usage & Troubleshooting Guide

Overview

The Atmos Jump is a compact dry herb vaporizer featuring carbon fiber construction, convection heating, and a 1200mAh battery. Its pen-style design prioritizes portability, fitting easily in pockets for on-the-go use.

This manual covers setup, loading, session technique, cleaning, and troubleshooting.

What's in the Box

• Atmos Jump vaporizer (1200mAh battery)
• Easy-access mouthpiece
• Packing tool
• Cleaning brush
• Micro-USB charger
• User manual

Note: Dry herb is sold separately.

Device Overview

Components

• Body: Carbon fiber housing with internal battery
• Mouthpiece: Removable top piece for loading and inhaling
• Heating Chamber: Hard anodized steel convection chamber
• Power Button: Single button for all controls
• Micro-USB Port: For charging

Button Functions

Action	Function
5 clicks	Power on/off
Hold	Heat/fire

Getting Started

Initial Charge

Before first use, fully charge your Jump:

1. Connect the Micro-USB cable to the device
2. Connect to a USB power source
3. Allow approximately 2 hours for full charge
4. A fully charged battery ensures optimal performance

Note: The device cannot be used while charging.

Understanding the Design

The Jump uses convection heating, where hot air passes through your herb to create vapor. This method:

• Preserves flavor better than conduction
• Heats herb more evenly
• Reduces combustion risk
• Requires proper packing technique

Loading the Chamber

Preparing Your Herb

1. Use quality, properly dried herb
2. Grind to medium-fine consistency
3. Avoid powder-fine or chunky grinds
4. Remove stems and seeds

Loading Steps

1. Ensure the device is powered off
2. Unscrew the mouthpiece counterclockwise
3. Use the packing tool to load ground herb
4. Fill the chamber loosely; do not overpack
5. Leave space for airflow
6. Replace the mouthpiece and secure it

Packing Tips

• Too loose: May not produce enough vapor
• Too tight: Restricts airflow, reduces vapor
• Just right: Herb moves slightly when shaken

Using Your Jump

Powering On

1. Click the power button 5 times rapidly within 2 seconds
2. The device is now on and ready to heat

Taking a Draw

1. Hold the power button to activate heating
2. Wait approximately 30-40 seconds for heat-up
3. Begin drawing slowly through the mouthpiece
4. Continue holding the button while inhaling
5. Release the button when finished
6. Exhale

Drawing Technique

For best results with convection heating:

• Draw slowly: Fast draws cool the heating element
• Draw steadily: Consistent airflow ensures even heating
• Take breaks: Short pauses between draws allow reheat
• Don't overdo it: Stop when vapor production decreases

Auto Shutoff

The Jump includes auto shutoff for safety:

• Engages after the heating cycle completes
• Prevents overheating of herb and device
• Restart by clicking 5 times to power on again

Session Tips

First-Time Users

1. Start with a smaller amount of herb
2. Take short draws to gauge vapor production
3. Increase draw length as you become comfortable
4. A full chamber lasts 5-10 minutes typically

Optimizing Vapor

• Grind herb finely for better extraction
• Pack loosely for proper airflow
• Draw slowly to maintain heat
• Stir herb between draws if needed

Ending a Session

1. Release the power button
2. Allow device to cool
3. Power off with 5 clicks when finished
4. Empty chamber while still warm (easier to clean)

Battery Information

Specifications

• Capacity: 1200mAh
• Sessions per charge: 15-20 approximately
• Charging: Micro-USB
• Charge time: ~2 hours

Battery Care

• Charge before complete depletion
• Use included or compatible Micro-USB cables
• Avoid extreme temperatures while charging
• Store with partial charge for extended storage

Maximizing Battery Life

• Shorter sessions conserve power
• Turn off between uses (5 clicks)
• Charge fully before first use
• Avoid leaving on unattended

Cleaning and Maintenance

After Each Session

1. Empty the chamber while still warm
2. Use the brush to remove loose debris
3. Tap gently to dislodge particles
4. Wipe the mouthpiece if needed

Weekly Cleaning

1. Disassemble the mouthpiece
2. Brush the chamber thoroughly
3. Clean the screen if accessible
4. Use a dry cotton swab for the airpath
5. Wipe exterior with a dry cloth

Deep Cleaning

Perform monthly or as needed:

1. Remove the mouthpiece
2. Soak removable parts in isopropyl alcohol (90%+)
3. Allow 15-30 minutes
4. Use cotton swabs for the chamber (device off and cool)
5. Rinse soaked parts with warm water
6. Dry completely before reassembly

What Not to Do

• Never submerge the battery/body in liquid
• Avoid using water in the heating chamber
• Don't use abrasive cleaning tools
• Never clean while the device is hot

Storage

Short-Term Storage

• Power off the device (5 clicks)
• Empty the chamber
• Store in a cool, dry place
• Keep upright if possible

Long-Term Storage

• Clean thoroughly before storing
• Charge battery to approximately 50%
• Store in original packaging if available
• Check and recharge every few months

Troubleshooting

No Power

1. Charge for at least 30 minutes
2. Click exactly 5 times within 2 seconds
3. Check Micro-USB port for debris
4. Try a different charging cable/source

No Vapor

1. Verify herb is loaded properly
2. Ensure device is powered on
3. Hold button long enough (30-40 seconds)
4. Check that herb is fresh and ground
5. Pack more loosely if overpacked

Poor Vapor Quality

1. Clean the chamber and airpath
2. Use fresher, quality herb
3. Grind more finely
4. Adjust packing density
5. Draw more slowly

Harsh Taste

1. Clean the device thoroughly
2. Reload with fresh herb
3. Pack more loosely
4. The herb may be over-extracted

Device Overheating

1. Stop use immediately
2. Allow complete cooling
3. Clean any buildup
4. Reduce session frequency
5. Contact support if persistent

Weak Battery Life

1. Ensure full charging
2. Try a different cable
3. Battery may need replacement
4. Contact Atmos support

Specifications

Specification	Value
Battery Capacity	1200mAh
Heating Method	Convection
Chamber Material	Hard anodized steel
Body Material	Carbon fiber
Height	5.75 inches
Diameter	0.68 inches
Charging	Micro-USB
Charge Time	~2 hours
Sessions Per Charge	15-20 (approx.)
Auto Shutoff	Yes
Temperature Control	No (single preset)
Warranty	1-year limited

Safety Information

General Safety

• Adult use only (21+)
• Keep away from children and pets
• Use only with compatible dry herb material
• Do not use damaged devices

Electrical Safety

• Use included or compatible Micro-USB cables
• Do not charge with incompatible adapters
• Do not leave charging unattended overnight
• Avoid charging in extreme temperatures

Usage Safety

• Allow cooling between extended sessions
• Do not touch the heating chamber when hot
• Stop use if device becomes excessively hot
• Use on stable, heat-resistant surfaces

Storage Safety

• Store away from heat sources
• Keep away from moisture
• Do not store with full chamber
• Remove battery concerns: contact support

Warranty Information

The Atmos Jump includes a 1-year limited warranty:

• Register your device at atmosrx.com
• Retain your purchase receipt
• Coverage includes manufacturing defects
• Does not cover user damage or wear items

Related: Atmos Jump Review | Atmos Aegis V2 Manual