Overview
The Lookah Bear is a 510-thread battery featuring an adorable bear-shaped design with soft food-grade silicone construction. This manual provides complete instructions for operating, charging, and maintaining your Bear battery.
The device's unique design includes the power button as the bear's nose and a lanyard attachment through its ear. Understanding these features ensures optimal operation with your 510 cartridges.
What's in the Box
Your Lookah Bear kit includes:
- 1x Lookah Bear Battery
Not Included: USB-C charging cable. You will need to provide your own USB-C cable for charging.
Note: 510 cartridges are sold separately.
Getting Started
Initial Charge
Before first use, fully charge your Bear:
- Locate the USB-C charging port (typically on the side or bottom)
- Connect a USB-C cable (not included)
- Connect to a USB power adapter (5V recommended)
- LED indicators illuminate during charging
- Charge for approximately 1.5 hours until full
- Disconnect when all four battery segments illuminate
Installing a Cartridge
- Ensure the device is powered off
- Locate the 510 connection on top of the Bear
- Screw your 510-threaded cartridge clockwise
- Tighten until snug - do not overtighten
- Cartridges with 0.7-5.0 ohm resistance are compatible
Powering On/Off
- Turn On: Press the bear's nose (power button) 5 times rapidly within 2 seconds
- Turn Off: Press the bear's nose 5 times rapidly within 2 seconds
- Auto-Off: Device powers off after extended inactivity
The voltage LED will illuminate when powered on.
Usage Instructions
Basic Operation
- Power on with 5 rapid clicks of the nose button
- Install cartridge by screwing into the 510 connection
- Select voltage by double-clicking to cycle settings
- Press and hold the nose button while inhaling
- Release when finished with your draw (10-second auto-cutoff limit)
- Power off with 5 rapid clicks when session is complete
Voltage Settings
Double-click the power button to cycle through three voltage options:
| Setting | Voltage | LED Color | Best For |
|---|---|---|---|
| Low | 3.2V | Green | Maximum flavor, terpy carts |
| Medium | 3.6V | Blue | Balanced performance |
| High | 3.9V | Purple | Maximum vapor, thick oils |
Recommendations:
- Live resin/terpy carts: 3.2V for flavor preservation
- Standard oil carts: 3.6V for balanced performance
- Thick distillates: 3.9V for adequate vapor
- Lower voltages extend battery life
Button Controls Summary
| Action | How To | Result |
|---|---|---|
| Power On/Off | 5 rapid clicks | Toggles device power |
| Change Voltage | Double-click | Cycles through 3.2V/3.6V/3.9V |
| Fire/Vape | Press and hold | Heats cartridge, produces vapor |
| Check Battery | Look at rear | 4-segment indicator shows level |
Battery Indicator
The rear of the Bear features a four-segment LED battery display:
| Segments Lit | Battery Level |
|---|---|
| 4 segments | 75-100% |
| 3 segments | 50-75% |
| 2 segments | 25-50% |
| 1 segment | 0-25% (charge soon) |
| Flashing | Critical - charge immediately |
Check the battery indicator by looking at the rear of the device. The display shows when powered on or during use.
Auto-Cutoff Feature
The Bear includes a 10-second auto-cutoff for safety:
- Firing automatically stops after 10 seconds of continuous use
- Prevents overheating of cartridge and battery
- Release and press again for additional draws
- Protects against accidental pocket firing
Using the Lanyard Attachment
The hole in the bear's ear serves as a lanyard attachment point:
- Thread a lanyard, keychain ring, or wrist strap through the ear hole
- Secure the attachment
- Wear around neck, attach to bag, or connect to keys
- Keeps the Bear accessible and prevents loss
Charging
Charging Procedure
- Connect a USB-C cable to the charging port
- Connect to a 5V USB power adapter
- Battery indicator shows charging progress
- Full charge takes approximately 1.5 hours
- All four segments illuminate when fully charged
- Disconnect when charging is complete
Battery Information
- Capacity: 500mAh
- Estimated uses per charge: 50-70 (varies by draw length and voltage)
- Charging port: USB-C (cable not included)
- Charge time: ~1.5 hours
- Recommended adapter: 5V/1A
Charging Safety
- Use standard USB-C cables
- Use 5V USB adapters (avoid fast-charge adapters)
- Charge in cool, dry environments
- Do not leave charging unattended overnight
- Do not charge if the device appears damaged
- Do not charge while vaping
Care & Maintenance
Cleaning the Silicone Body
The food-grade silicone may attract lint and dust:
- Wipe with a slightly damp cloth
- For stubborn debris, use mild soap and water on the exterior only
- Dry thoroughly before use
- Do not submerge the device in water
- Keep the charging port and 510 connection dry
Cleaning the 510 Connection
Maintain good cartridge contact:
- Remove the cartridge
- Use a dry cotton swab to clean the 510 connection
- Remove any oil residue or debris
- Clean weekly or when changing cartridges
- Do not use liquid cleaners on the connection
Storage
For optimal storage:
- Store in a cool, dry place
- Avoid extreme temperatures
- Keep away from direct sunlight
- Store upright when cartridge is installed
- Remove cartridge for long-term storage
- Use the lanyard to keep in a consistent location
Silicone Care
The soft silicone body requires minimal care:
- Avoid sharp objects that could puncture
- Keep away from heat sources
- The material is naturally resistant to drops
- Clean regularly to maintain appearance
- Store away from items that could transfer color
Safety Information
General Safety
- Age Restriction: For adult use only (21+)
- Keep Away from Children: Store securely
- Intended Use: Use only with legal 510 cartridges
- Do Not Modify: Use as designed
Built-in Protections
The Bear includes multiple safety features:
- 10-Second Auto-Cutoff: Prevents overheating
- Overcharge Protection: Safeguards during charging
- Overuse Protection: Monitors extended operation
- Open Circuit Protection: Detects missing cartridge
- Short Circuit Protection: Prevents electrical shorts
Battery Precautions
- Use only USB-C cables with compatible adapters
- Do not expose to extreme temperatures
- Do not puncture, crush, or disassemble
- Do not expose to water or moisture
- Dispose of properly per local battery regulations
Usage Precautions
- Do not fire without a cartridge installed
- Release the button if vapor becomes too hot
- Allow cooling between extended sessions
- Do not operate while driving
- Store away from children and pets
Warranty Information
The Lookah Bear is covered by a limited manufacturer's warranty:
- Duration: 3 months from date of purchase
- Coverage: Defects in materials and workmanship
- Exclusions: Physical damage, water damage, misuse, normal wear, accessories
Contact Lookah customer support with proof of purchase for warranty claims.
Related: Lookah Bear Review