Overview
The Geek Bar Pulse 15000 is a high-capacity disposable vape featuring dual mesh coils, a full-color OLED display, and switchable power modes. This guide covers everything you need to know to set up, use, and maintain your Pulse 15000.
Whether you're a first-time vaper or experienced user, this manual will help you get the most from your device.
What's in the Box
Your Geek Bar Pulse 15000 package includes:
- 1x Geek Bar Pulse 15000 device (pre-filled with 16mL e-liquid)
- 1x Silicone mouthpiece plug (pre-installed)
- 1x User manual / warranty card
Note: A USB-C charging cable is not included. Use any standard USB-C cable for charging.
Device Anatomy
Understanding your Pulse 15000's components helps you use it effectively:
Mouthpiece
The flat, ergonomic mouthpiece sits at the top of the device. A silicone plug protects it during shipping and storage. Remove this plug before first use.
Full-Color OLED Display
The front-facing display shows:
- Battery Level: Percentage indicator (0-100%)
- E-Liquid Level: Animated liquid gauge
- Puff Counter: Running total of puffs taken
- Mode Indicator: Rocket icon appears in Pulse mode
The display activates when you inhale and during charging.
Main Body
The box-style body houses the 650mAh battery, dual mesh coils, and 16mL e-liquid tank. The matte finish resists fingerprints and provides secure grip.
Mode Switch
Located on the bottom of the device, the three-position slider controls power modes:
- Left position (Close): Device deactivated
- Middle position (Regular): 11W single coil, 15,000 puffs
- Right position (Pulse): 20W dual coil, 7,500 puffs
USB-C Charging Port
The charging port is located on the bottom of the device, next to the mode switch. Use any standard USB-C cable to charge.
Airflow Control
The adjustable airflow ring on the bottom lets you customize draw resistance. Rotate to open (more airflow, looser draw) or close (less airflow, tighter draw).
First-Time Setup
Step 1: Unbox Your Device
- Remove the Geek Bar Pulse from its packaging
- Locate and pull out the silicone mouthpiece plug
- Keep the plug for storage when not using the device
Step 2: Check the Display
- Inhale briefly from the mouthpiece to wake the display
- Verify battery level (should show 30-50% from factory)
- Confirm e-liquid gauge shows full
Step 3: Select Your Mode
- Locate the mode switch on the bottom of the device
- Slide from "Close" to your preferred mode:
- Regular: Middle position for 15,000 puffs at 11W
- Pulse: Right position for 7,500 puffs at 20W
- The display will show a rocket icon when Pulse mode is active
Step 4: Initial Charge (Recommended)
While the device works out of the box, an initial charge ensures optimal performance:
- Connect a USB-C cable to the charging port
- Plug into a USB power source (phone charger works well)
- Wait for the display to show 100%
- Disconnect and begin vaping
How to Use Your Geek Bar Pulse
Basic Operation
The Geek Bar Pulse is draw-activated, meaning no buttons are required:
- Ensure the mode switch is not in the "Close" position
- Place the mouthpiece to your lips
- Inhale steadily for 2-4 seconds
- The device fires automatically and the display activates
- Exhale and enjoy
Adjusting Airflow
Customize your draw resistance:
- Locate the airflow ring on the device bottom
- Rotate counterclockwise to increase airflow (looser draw)
- Rotate clockwise to decrease airflow (tighter draw)
- Test and adjust until comfortable
Recommendations:
- Tight MTL draw: Close airflow almost completely
- Balanced draw: Set airflow to middle position
- Open DTL draw: Fully open the airflow ring
Checking Device Status
Glance at the display while vaping to monitor:
- Battery percentage: Charge when below 20%
- E-liquid level: Device is near end-of-life when empty
- Puff count: Track your usage over time
- Mode indicator: Rocket icon = Pulse mode active
Understanding the Two Modes
The Pulse 15000 offers two distinct vaping experiences. Choose based on your preferences:
Regular Mode
| Specification | Value |
|---|---|
| Switch Position | Middle |
| Wattage | 11W |
| Coils Active | Single mesh |
| Puff Count | Up to 15,000 |
| Vapor | Moderate, smooth |
| Battery Usage | Lower |
Best for:
- All-day vaping with maximum device life
- Smooth, consistent throat hit
- Discreet vapor production
- Extending time between charges
Pulse Mode
| Specification | Value |
|---|---|
| Switch Position | Right |
| Wattage | 20W |
| Coils Active | Both mesh coils |
| Puff Count | Up to 7,500 |
| Vapor | Dense, warm |
| Battery Usage | Higher |
Best for:
- Intense flavor experience
- Larger vapor clouds
- Shorter, more satisfying sessions
- Users who prioritize flavor over longevity
Switching Modes
You can change modes at any time:
- Move the bottom switch to desired position
- The display updates immediately to reflect the change
- Continue vaping in the new mode
The device remembers your settings even when not in use. Moving to "Close" deactivates the device completely.
LED Display Guide
The OLED display communicates device status clearly:
Battery Indicators
| Display Shows | Meaning |
|---|---|
| 70-100% (green tint) | Fully charged, normal use |
| 30-69% (yellow tint) | Moderate charge, consider charging soon |
| Below 30% (red tint) | Low battery, charge needed |
| Flashing battery icon | Critical battery, charge immediately |
| Charging animation | Device is charging |
| 100% (solid) | Fully charged, disconnect cable |
E-Liquid Indicators
| Display Shows | Meaning |
|---|---|
| Full gauge animation | Plenty of e-liquid remaining |
| Partial gauge | E-liquid depleting normally |
| Low/empty gauge | Device near end-of-life |
| Flashing empty | E-liquid depleted, dispose of device |
Mode Indicators
| Display Shows | Meaning |
|---|---|
| No rocket icon | Regular mode active (11W) |
| Rocket icon visible | Pulse mode active (20W) |
Other Display Behaviors
| Behavior | Meaning |
|---|---|
| Display off | Device in Close mode or sleeping |
| Brief flash on inhale | Normal draw activation |
| Display stays lit | Currently charging |
Charging Instructions
How to Charge
- Locate the charging port on the bottom of your device
- Connect a USB-C cable to the charging port
- Plug into a power source (phone charger, computer USB, or power bank)
- Monitor the display - battery percentage increases during charging
- Wait for 100% - full charge takes 45-60 minutes
- Disconnect the cable when charging completes
Charging Tips
Do:
- Use a standard 5V/1A or 5V/2A power source
- Charge at room temperature (65-77°F / 18-25°C)
- Remove from heat sources while charging
- Disconnect when fully charged
Don't:
- Use fast chargers designed for phones (may damage battery)
- Charge unattended overnight
- Charge in direct sunlight or hot cars
- Use damaged cables
- Attempt to vape while charging
Charging Indicators
| Display Shows | Status |
|---|---|
| Battery animation | Currently charging |
| Percentage increasing | Normal charging progress |
| Steady 100% | Fully charged, disconnect |
| No change after 10 min | Try different cable/power source |
Quick Charging
Need a quick boost? A 10-15 minute charge adds significant battery life for on-the-go situations. This partial charge is safe and won't damage the battery.
Care and Maintenance
Proper care extends your device's lifespan and ensures consistent performance.
Daily Care
- Wipe the mouthpiece with a clean, dry cloth
- Check the display for battery and e-liquid levels
- Store upright when possible to prevent leaking
- Replace mouthpiece plug when storing in bags or pockets
Weekly Care
- Clean the mouthpiece area with a dry cotton swab
- Inspect the charging port for lint or debris
- Check airflow slots for blockages
- Wipe exterior with a dry microfiber cloth
Storage Recommendations
Short-term storage (hours to days):
- Replace the mouthpiece plug
- Move switch to "Close" position
- Store at room temperature
- Keep away from direct sunlight
Long-term storage (weeks):
- Charge to approximately 50%
- Replace mouthpiece plug
- Store in a cool, dry place
- Avoid extreme temperatures
What to Avoid
- Water and liquids: Never submerge or clean with wet materials
- Extreme temperatures: Don't leave in hot cars or freezing conditions
- Harsh chemicals: No alcohol, solvents, or cleaning agents
- Physical damage: Protect from drops and impacts
- Direct sunlight: Prolonged exposure degrades e-liquid and battery
Safety Information
Nicotine Warning
This product contains nicotine. Nicotine is an addictive chemical.
- For adult use only (21+ in most US states)
- Keep away from children and pets
- Not for use by pregnant or nursing women
- Stop use if you experience adverse effects (dizziness, nausea, etc.)
- Store e-liquid products away from children - nicotine is toxic if ingested
Battery Safety
The Geek Bar Pulse contains a rechargeable lithium battery. Follow these precautions:
- Do not expose to fire, heat sources, or direct sunlight for extended periods
- Do not attempt to open, puncture, or modify the device
- Do not use if the device is damaged, dented, or leaking
- Do not continue using if the device becomes excessively hot
- Do not charge with damaged cables or incompatible chargers
- Dispose properly according to local electronic waste regulations
General Precautions
- Use only as intended for vaping
- Do not modify or attempt to refill the device
- Keep the charging port dry
- Discontinue use if you notice unusual tastes, sounds, or smells
- Do not use near flammable materials
Troubleshooting
Device Not Hitting / No Vapor
Check these items in order:
- Mode switch position: Ensure it's not in "Close" (left position)
- Mouthpiece plug: Remove if still attached
- Battery level: Charge if display shows low battery
- E-liquid level: If empty, the device is depleted
- Draw strength: Try a firmer, longer inhale
- Airflow: Ensure the airflow ring isn't fully closed
Still not working? Try the reset procedure below.
Blinking or Flashing Display
| Blinking Pattern | Meaning | Solution |
|---|---|---|
| Battery icon flashing | Critical low battery | Charge immediately |
| E-liquid icon flashing | E-liquid depleted | Device end-of-life, dispose |
| Rapid flashing | Error or short protection | Reset the device |
Burnt or Bad Taste
Causes and solutions:
- E-liquid depleted: Check display gauge. If empty, the device is finished.
- Chain vaping: Allow 10-15 seconds between puffs for wick saturation.
- High wattage: Switch to Regular mode if taste persists.
- Coil failure: If consistent across modes, the device may be defective.
Weak Vapor Production
- Try Pulse mode for increased vapor output
- Check battery level and charge if needed
- Open the airflow for more air intake
- Take longer draws (3-4 seconds)
- Check e-liquid level - low e-liquid reduces vapor
Not Charging
Troubleshooting steps:
- Try a different USB-C cable - cables can fail
- Try a different power source - ensure 5V output
- Clean the charging port with a dry toothpick or compressed air
- Check for debris blocking the connection
- Ensure room temperature - batteries won't charge if too hot or cold
Leaking
- Check mouthpiece seal - ensure silicone plug was removed cleanly
- Store upright when not in use
- Avoid temperature extremes which can cause expansion
- Don't over-draw - excessive suction can flood the coil
Reset Procedure
If your device behaves erratically:
- Move the switch to "Close" position
- Wait 10-15 seconds
- Move to Regular or Pulse position
- Test with a normal draw
- If problems persist, the device may be defective
Specifications Summary
| Specification | Value |
|---|---|
| Model | Geek Bar Pulse 15000 |
| Manufacturer | Geekvape |
| Puff Count (Regular) | Up to 15,000 |
| Puff Count (Pulse) | Up to 7,500 |
| E-Liquid Capacity | 16mL |
| Nicotine Strength | 5% (50mg) Salt Nicotine |
| Battery | 650mAh (rechargeable) |
| Wattage (Regular) | 11W |
| Wattage (Pulse) | 20W |
| Coil Type | Dual Mesh |
| Charging | USB Type-C |
| Charge Time | 45-60 minutes |
| Display | Full-Color OLED |
| Dimensions | 52.6 x 27.7 x 82.6mm |
| Weight | 82g |
| Activation | Draw-activated |
| Airflow | Adjustable |
Disposal
When your Geek Bar Pulse is depleted:
- Do not throw in regular trash
- Locate e-waste recycling in your area
- Many vape shops accept used devices for recycling
- Check local regulations for battery disposal requirements
- Consider manufacturer programs for proper disposal
The device contains lithium batteries and electronic components that require proper recycling to protect the environment.
Related: Geek Bar Pulse 15000 Review | Pulse X 25K Manual | Geek Bar Flavors | Geek Bar Brand Page