Dr. Dabber XS Manual: Complete Setup, Usage & Troubleshooting Guide

Overview

The Dr. Dabber XS is an ultra-compact e-rig designed for maximum portability. It features spillproof glass for worry-free transport, TCH temperature control for consistent heating, and a quartz atomizer for clean flavor.

This manual covers setup, operation, the spillproof glass system, and maintenance for optimal performance.

What's in the Box

• Dr. Dabber XS base unit
• Spillproof glass attachment
• Quartz eChamber atomizer
• Glass carb cap
• Carb cap leash
• Filling funnel
• USB-C charging cable
• Iso-Snaps cleaning swabs
• Loading tool
• User manual

Note: Contents may vary by retailer or bundle purchased.

Device Overview

Components

• Base Unit: Houses the battery, heating element, controls, and LED indicator
• Spillproof Glass: Water filtration chamber designed to prevent spills
• eChamber Atomizer: Quartz heating surface with knurled finish
• Carb Cap: Glass cap for airflow control
• Carb Cap Leash: Tether to keep cap attached during sessions

Button Functions

Action	Function
5 clicks	Power on/off
3 clicks	Cycle temperature settings
2 clicks	Start heating session

Getting Started

Initial Charge

Before first use, fully charge your XS:

1. Connect the USB-C cable to the base unit
2. Connect to a USB power source
3. LED indicator shows charging status
4. Full charge takes 30-60 minutes
5. Device is ready when LED indicates full charge

Note: The XS supports pass-through charging—use while plugged in for unlimited sessions.

Assembling the Device

1. Install the atomizer:

   • Thread the quartz eChamber onto the base unit
   • Hand-tight only—do not overtighten
   • The atomizer should sit flat and secure

2. Add water to the glass:

   • Use the included filling funnel for easier filling
   • Place funnel in the glass opening
   • Add room temperature water
   • Fill to appropriate level (see Water Guidelines below)
   • Remove funnel

3. Attach the glass:

   • Align the glass with the base unit
   • Press down firmly until it seats
   • The glass should sit securely without wobbling

4. Attach the carb cap leash:

   • Thread the leash through the carb cap loop
   • Attach the other end to the device or your finger
   • Prevents losing the cap during sessions

Powering On/Off

• Turn On: Click the power button 5 times rapidly within 2 seconds
• Turn Off: Click the power button 5 times rapidly within 2 seconds

LED color indicates current temperature setting when powered on.

Spillproof Glass System

How It Works

The XS glass uses a special design that prevents water from spilling when the device is tilted:

• Internal baffles contain water during movement
• Vapor path remains clear for normal use
• You can transport with water inside the chamber

Benefits

• Travel-ready: No need to empty water before transport
• Grab-and-go: Always ready for a session
• Less mess: Eliminates accidental water spills
• Convenience: Ideal for active lifestyles

Limitations

• Aggressive draws: Very hard pulls can still move water
• Violent shaking: The design has limits—don't shake vigorously
• Extended travel: Emptying is still recommended for long trips

Using the Filling Funnel

The included funnel makes water filling easier:

1. Remove the glass from the base
2. Insert the funnel into the glass opening
3. Pour water slowly through the funnel
4. Remove funnel when filled appropriately
5. Reattach glass to base

Temperature Settings

TCH Temperature Control

TCH (Temperature Control Heating) provides calibrated, consistent heating at four presets:

Setting	Temperature	LED Color	Best For
1	475°F	Blue	Maximum flavor, light vapor
2	525°F	Green	Balanced flavor and vapor
3	575°F	Yellow	Standard dabbing
4	625°F	Red	Maximum vapor, thick concentrates

Changing Temperature

1. With the device powered on, click the button 3 times rapidly
2. LED color changes to indicate new temperature
3. Continue clicking to cycle through all 4 settings
4. Device remembers your last setting when powered off

Temperature Recommendations

• Live resin, rosin: Setting 1 (475°F)
• Shatter, wax: Settings 2-3 (525-575°F)
• Thick concentrates: Settings 3-4 (575-625°F)
• New users: Start at setting 2 and adjust

Usage Instructions

Loading Concentrate

1. Power on the device (5 clicks)
2. Remove the glass attachment and carb cap
3. Use the loading tool to place concentrate in the atomizer
4. Start with a rice-grain sized amount
5. Place concentrate in the center of the quartz surface
6. Reattach the glass

Tips:

• Do not overload—excess can overflow
• Room temperature concentrates are easier to handle
• Clean the atomizer before loading if residue is visible

Taking a Dab

1. Ensure glass is attached and water level is correct
2. Load concentrate onto the atomizer
3. Select your temperature (3 clicks to cycle)
4. Double-click the button to start heating
5. Wait 9-12 seconds for heat-up (LED indicates ready)
6. Place the carb cap over the atomizer
7. Inhale through the mouthpiece
8. Manipulate the carb cap to control airflow
9. Continue until vapor diminishes

Using the Carb Cap

The glass carb cap controls airflow during your draw:

• Cap on, sealed: Maximum vapor density, restricted airflow
• Cap lifted slightly: More airflow, cooler vapor
• Cap removed: Open airflow, lightest vapor

The carb cap leash keeps the cap attached so you can manipulate it freely without risk of dropping.

Session Tips

• Slower, longer draws produce smoother vapor
• The carb cap is essential for proper vapor production
• Moderate draw strength—the small glass can be overwhelmed
• Clean the atomizer while warm for easy maintenance

Water Guidelines

Proper Water Level

1. Remove the glass from the base
2. Use the filling funnel for easier filling
3. Add room temperature water
4. Level should allow bubbling without reaching mouthpiece
5. Less water = less filtration but easier draws
6. More water = better filtration but risk of splash

Water Tips

• Change water daily for best flavor
• Room temperature water works best
• Empty before extended travel despite spillproof design
• Never use hot water (risk of thermal shock)
• Avoid other liquids (juice, alcohol, etc.)

Battery Information

Specifications

• Capacity: ~35 heating cycles per charge
• Charging: USB-C pass-through
• Charge Time: 30-60 minutes

LED Battery Indicators

The LED provides feedback on battery status:

• Bright LED: Good charge
• Dimming LED: Low charge
• Flashing: Critical—charge immediately

Charging Tips

• Quick 30-60 minute charge time enables easy top-ups
• Pass-through charging allows use while plugged in
• Any USB-C cable works
• Avoid completely depleting battery for longest lifespan

Atomizer Information

Quartz eChamber

The XS uses a quartz eChamber atomizer featuring:

• Pure quartz surface: Clean, neutral flavor
• Knurled finish: Holds concentrate in place
• Direct vapor path: Minimal distance to mouthpiece
• Easy cleaning: Smooth surface wipes clean

Atomizer Care

After each session:

• Q-tip the atomizer while still warm
• Use included Iso-Snaps for quick cleaning
• Remove residue before it hardens

Weekly:

• Remove atomizer from base
• Soak in isopropyl alcohol (90%+)
• Clean with Q-tips
• Dry completely before reinstalling

Replacement: Replace the atomizer when you notice:

• Persistent off-flavors despite cleaning
• Visible cracks or chips
• Reduced vapor production
• Uneven heating

Maintenance

Daily Care

1. Q-tip the atomizer while warm (Iso-Snaps make this easy)
2. Empty water from the glass
3. Wipe exterior if needed

Weekly Cleaning

Atomizer:

1. Remove from base
2. Soak in isopropyl alcohol for 15-30 minutes
3. Clean with Q-tips
4. Rinse with water (optional)
5. Dry completely

Spillproof Glass:

1. Remove from base
2. Empty all water
3. Add isopropyl alcohol
4. Let soak for 30 minutes
5. Rinse thoroughly with warm water
6. Air dry completely

Base Unit:

1. Wipe with slightly damp cloth
2. Keep USB-C port free of debris
3. Clean connection points
4. Never submerge in liquid

Using Iso-Snaps

The included Iso-Snaps are pre-soaked cleaning swabs:

1. Remove an Iso-Snap from the container
2. Swab the warm atomizer surface
3. The isopropyl alcohol dissolves residue
4. Dispose of used swab
5. Allow atomizer to dry before next use

Portable Use Tips

Traveling with the XS

The spillproof glass makes transport easier:

1. Water level: Keep moderate—less risk of any movement
2. Carb cap: Secure with the leash to prevent loss
3. Case: Use a protective case (not included) for transport
4. Temperature: Avoid extreme temperatures during storage

Quick Sessions

The XS is designed for fast, portable sessions:

1. Keep device charged and water-filled
2. Power on (5 clicks)
3. Load concentrate quickly
4. Heat and inhale (total time under 30 seconds)
5. Power off when finished

Discretion

The compact size aids discrete use:

• Quick heat-up means short exposure time
• Small form factor is less noticeable
• Minimal odor compared to torches
• Quiet operation

Safety Information

General Safety

• Adult use only (21+)
• Keep away from children and pets
• Do not use if device appears damaged
• Stop use if device overheats unexpectedly

Electrical Safety

• Use only compatible USB-C cables
• Do not charge on flammable surfaces
• Inspect cables for damage
• Keep base away from water

Glass Safety

• Handle spillproof glass carefully—it can still break
• Do not use if cracked or chipped
• Avoid dropping
• The spillproof design does not make glass unbreakable

Atomizer Safety

• Atomizer becomes very hot during use
• Allow cooling before handling
• Use the loading tool, not fingers
• Replace damaged atomizers

Specifications

Specification	Value
Temperature Range	475-625°F (4 settings)
Heat-Up Time	9-12 seconds
Battery Life	~35 heating cycles
Charge Time	30-60 minutes
Charging	USB-C pass-through
Dimensions	6.47" × 1.82"
Weight	9.4 oz (267g)
Atomizer	Quartz eChamber
Glass	Spillproof design
Warranty	1 year

Troubleshooting

Device Won't Power On

1. Ensure battery is charged
2. Click exactly 5 times within 2 seconds
3. Check USB-C port for debris
4. Try a different charging cable
5. Charge for at least 15 minutes

No Vapor Production

1. Verify concentrate is loaded on atomizer
2. Increase temperature setting
3. Use the carb cap for proper airflow
4. Clean the atomizer if residue is visible
5. Check that glass is properly attached

Weak Vapor

1. Increase temperature (3 clicks to cycle)
2. Seal the carb cap more completely
3. Load slightly more concentrate
4. Clean the atomizer
5. Try slower, longer draws

Water Issues

1. Check water level—not too high
2. Draw more gently
3. The spillproof design has limits
4. Reduce water level if splashing occurs

Atomizer Problems

1. Ensure atomizer is fully threaded
2. Clean connection points
3. Check for damage or cracks
4. Try reinstalling the atomizer
5. Replace if issues persist

Battery Draining Quickly

1. Lower temperature settings
2. Shorter sessions conserve power
3. Don't leave powered on when not in use
4. Use pass-through charging when available
5. Battery capacity decreases over time

Warranty Information

The Dr. Dabber XS includes a 1-year warranty covering:

• Battery defects
• Electrical component failures
• Charging system issues
• Manufacturing defects

Warranty does not cover:

• Physical damage from drops or misuse
• Normal wear and tear
• Glass breakage
• Consumable parts (atomizers)
• Water damage to electrical components
• Unauthorized modifications

For warranty service, contact Dr. Dabber support with proof of purchase.

Related: Dr. Dabber XS Review | Dr. Dabber Boost Evo Manual