Dr. Dabber Boost Evo Manual: Complete Setup, Usage & Troubleshooting Guide

Overview

The Dr. Dabber Boost Evo is a portable e-rig designed for on-the-go concentrate consumption. It features a quartz-to-glass vapor pathway, six temperature settings, and the Quick Connect magnetic attachment system for easy assembly.

This manual covers setup, operation, the Quick Connect system, and maintenance for optimal performance.

What's in the Box

• Dr. Dabber Boost Evo base unit
• Quartz atomizer
• Glass bubbler attachment
• Quick Connect adapter
• Custom loading tool
• USB-C charging cable
• Hard carrying case
• User manual

Note: Contents may vary by retailer or bundle purchased.

Device Overview

Components

• Base Unit: Houses the battery, heating element, controls, and LED lighting
• Atomizer: Quartz heating surface where concentrate is placed
• Quick Connect Adapter: Magnetic attachment with integrated carb button
• Glass Bubbler: Water filtration chamber with mouthpiece

Button Functions

Action	Function
5 clicks	Power on/off
3 clicks	Cycle temperature settings
2 clicks	Start heating session
Hold during session	Boost heating

Getting Started

Initial Charge

Before first use, fully charge your Boost Evo:

1. Connect the USB-C cable to the base unit
2. Connect to a USB power source
3. LED indicators show charging status
4. Full charge takes 1-2 hours depending on adapter
5. Device is ready when LEDs indicate full charge

Note: You can use the Boost Evo while charging (pass-through charging).

Assembling the Device

1. Prepare the Quick Connect:

   • The Quick Connect adapter should be attached to the glass bubbler
   • If detached, press the adapter firmly into the bottom of the glass

2. Add water to the glass:

   • Remove the glass from packaging
   • Fill with room temperature water
   • Water level should be just above the intake holes
   • Do not overfill—this causes splashback

3. Install the atomizer:

   • Thread the quartz atomizer onto the base unit
   • Hand-tight only—do not overtighten
   • Ensure the atomizer sits flat and secure

4. Attach the glass:

   • Align the Quick Connect adapter over the base
   • Press down firmly until the magnet clicks
   • The glass should sit securely without wobbling

Powering On/Off

• Turn On: Click the power button 5 times rapidly within 2 seconds
• Turn Off: Click the power button 5 times rapidly within 2 seconds

LED lighting will indicate power status and current temperature setting.

Quick Connect System

The Quick Connect is a magnetic attachment that provides several benefits:

How It Works

1. The Quick Connect adapter attaches to the bottom of the glass bubbler
2. Magnets in the adapter align with magnets in the base
3. Simply press down to connect; twist and lift to remove
4. The integrated carb button provides airflow control

Using the Carb Button

The carb button is located on the Quick Connect adapter:

• Press: Restricts airflow for denser, more flavorful vapor
• Release: Opens airflow for larger, cooler hits
• Pulse: Many users alternate pressing and releasing during draws

Glass Swapping

The Quick Connect makes it easy to:

• Remove glass for cleaning
• Swap between different glass attachments
• Quickly disassemble for transport

Temperature Settings

Settings Overview

The Boost Evo offers six calibrated temperature settings:

Setting	Temperature	LED Color	Best For
1	500°F	Blue	Flavor-focused, light vapor
2	550°F	Cyan	Balanced low-temp
3	600°F	Green	All-around use
4	650°F	Yellow	Standard dabbing
5	700°F	Orange	Thick concentrates
6	750°F	Red	Maximum vapor

Changing Temperature

1. With the device powered on, click the button 3 times rapidly
2. LED color changes to indicate new temperature
3. Continue clicking to cycle through all 6 settings
4. Device remembers your last setting

Temperature Recommendations

• Live resin, rosin: Settings 1-2 (500-550°F)
• Shatter, wax: Settings 3-4 (600-650°F)
• Thick concentrates: Settings 5-6 (700-750°F)
• New users: Start at setting 2-3 and adjust

Usage Instructions

Loading Concentrate

1. Power on the device (5 clicks)
2. Remove the glass attachment via Quick Connect
3. Use the included loading tool to place concentrate on the atomizer
4. Start with a rice-grain sized amount
5. Place concentrate in the center of the atomizer surface
6. Reattach the glass

Tips:

• Do not overload—excess can overflow and clog airflow
• Room temperature concentrates are easier to handle
• Clean the atomizer before loading if residue is present

Taking a Dab

1. Ensure glass is attached and water level is correct
2. Load concentrate onto the atomizer
3. Select your temperature (3 clicks to cycle)
4. Double-click the button to start heating
5. Wait 9-12 seconds for the device to reach temperature
6. Inhale through the mouthpiece while using the carb button
7. Continue inhaling until vapor diminishes
8. Release the button when finished

Session Tips

• The carb button controls your hit density—experiment to find your preference
• Slower, longer draws often produce smoother vapor
• You can hold the button during a session for continuous heating
• Clean the atomizer while warm for easier maintenance

Water Filtration

Proper Water Level

1. Remove the glass from the base
2. Fill with clean, room temperature water
3. Level should be just above the intake holes (small holes near the bottom)
4. Do not overfill—excess water will splash into your mouth

Water Level Guide

Level	Result
Too low	Insufficient filtration, harsh hits
Correct	Smooth, cooled vapor
Too high	Water splashes into mouthpiece

Water Tips

• Change water daily for best flavor
• Room temperature water works best
• Empty water before transporting
• Cold water provides extra cooling but may cause condensation

Battery Information

Specifications

• Capacity: ~60 heating cycles (exceptional for portable e-rigs)
• Charging: USB-C pass-through
• Charge Time: 1-2 hours (varies by adapter)

LED Battery Indicators

During use, LED brightness indicates approximate battery level:

• Full brightness: High charge
• Dimmed: Medium charge
• Low/flashing: Charge soon

Charging Tips

• Any USB-C cable works, though faster adapters charge quicker
• Pass-through charging allows use while plugged in
• Avoid completely depleting the battery for longest lifespan
• Store with partial charge for extended storage

Atomizer Information

Quartz Atomizer (Included)

The stock quartz atomizer provides:

• Clean flavor from inert quartz material
• Moderate heat retention
• Easy cleaning with isopropyl alcohol
• Good all-around performance

Sapphire Atomizer (Upgrade)

Available separately ($90), the sapphire atomizer offers:

• Superior heat retention for longer sessions
• Cleaner flavor due to sapphire's inert properties
• Easier cleaning than quartz
• More even heat distribution
• Premium upgrade for serious users

Atomizer Care

After each session:

• Q-tip the atomizer while warm
• Removes residue before it hardens

Weekly:

• Remove atomizer from base
• Soak in isopropyl alcohol for 15-30 minutes
• Use Q-tips to clean any remaining residue
• Dry completely before reinstalling

Replacement: Replace the atomizer when you notice:

• Persistent off-flavors despite cleaning
• Visible cracks or damage
• Reduced vapor production
• Uneven heating

Maintenance

Daily Care

1. Q-tip the atomizer while still warm
2. Empty water from the glass
3. Wipe down the base if needed

Weekly Cleaning

Atomizer:

1. Remove from base
2. Soak in isopropyl alcohol (90%+) for 15-30 minutes
3. Clean with Q-tips
4. Rinse with water (optional)
5. Dry completely before use

Glass Bubbler:

1. Remove from Quick Connect
2. Empty all water
3. Fill with isopropyl alcohol
4. Let soak for 30 minutes
5. Shake gently to remove residue
6. Rinse thoroughly with water
7. Air dry completely

Quick Connect Adapter:

1. Wipe magnetic surfaces clean
2. Check carb button hole for blockage
3. Clean with Q-tip if needed

Base Unit:

1. Wipe exterior with damp cloth
2. Keep USB-C port free of debris
3. Never submerge in liquid

Using the Carrying Case

The included hard case provides protection for travel:

Packing the Case

1. Empty water from the glass
2. Remove the glass from the base (Quick Connect allows easy separation)
3. Place base in the main compartment
4. Place glass in the designated slot
5. Store accessories in remaining space
6. Close securely

Travel Tips

• Always empty water before packing
• Let atomizer cool before storing
• The case protects against impacts but is not waterproof
• Keep the case upright to prevent any remaining residue from shifting

Safety Information

General Safety

• Adult use only (21+)
• Keep away from children and pets
• Do not use if device appears damaged
• Stop use if device overheats unexpectedly

Electrical Safety

• Use only compatible USB-C cables
• Do not charge on flammable surfaces
• Inspect cables for damage regularly
• Keep base away from water

Glass Safety

• Handle glass attachment carefully
• Do not use if cracked or chipped
• Avoid sudden temperature changes
• Store safely in the provided case

Atomizer Safety

• Atomizer becomes very hot during use
• Allow cooling before handling
• Use the loading tool, not your fingers
• Replace damaged atomizers immediately

Specifications

Specification	Value
Temperature Range	500-750°F (6 settings)
Heat-Up Time	9-12 seconds
Battery Life	~60 heating cycles
Charge Time	1-2 hours
Charging	USB-C pass-through
Dimensions	7.75" × 2.83"
Weight	12.8 oz (363g)
Atomizer	Quartz (Sapphire available)
Warranty	1 year

Troubleshooting

Device Won't Power On

1. Ensure battery is charged
2. Click exactly 5 times within 2 seconds
3. Check USB-C port for debris
4. Try a different charging cable
5. Charge for at least 30 minutes

No Vapor Production

1. Verify concentrate is loaded on atomizer
2. Increase temperature setting
3. Check carb button—ensure it's not permanently open
4. Clean the atomizer
5. Try longer heat-up time

Weak Vapor

1. Increase temperature (3 clicks to cycle)
2. Use the carb button to restrict airflow
3. Load more concentrate
4. Clean the atomizer if residue is visible
5. Check water level (too high can reduce draw)

Quick Connect Issues

1. Ensure adapter is firmly attached to glass
2. Clean magnetic contact points
3. Align straight before pressing down
4. Check for debris on base magnets
5. Do not force—should click easily when aligned

Harsh Vapor

1. Lower temperature setting
2. Check water level—ensure adequate filtration
3. Clean atomizer thoroughly
4. Try smaller loads
5. Consider atomizer replacement if persistent

Battery Draining Quickly

1. Lower temperature settings use less power
2. Shorter sessions extend battery life
3. Avoid leaving powered on when not in use
4. Battery capacity decreases over time
5. Use pass-through charging for extended sessions

Warranty Information

The Dr. Dabber Boost Evo includes a 1-year warranty covering:

• Battery defects
• Electrical component failures
• Charging system issues
• Manufacturing defects

Warranty does not cover:

• Physical damage from drops or misuse
• Normal wear and tear
• Glass breakage
• Consumable parts (atomizers)
• Water damage
• Unauthorized modifications

For warranty service, contact Dr. Dabber support with proof of purchase.

Related: Dr. Dabber Boost Evo Review | Dr. Dabber Switch² Manual