Vessel Craftsman Manual: Setup, Usage & Troubleshooting: Complete Setup & Usage Guide

Overview

The Vessel Craftsman is a premium 510 thread battery that combines authentic wood craftsmanship with modern vaping technology. Featuring real hardwood accents, anodized aluminum construction, and four precise voltage settings, the Craftsman represents Vessel's commitment to elevated design.

This manual covers everything you need to know to get the most from your Craftsman, from initial setup through daily use, wood care, and maintenance.

What's in the Box

• Vessel Craftsman battery unit
• USB magnetic charging cable
• User manual / Quick start guide

Device Overview

Physical Layout

• Top - 510 thread connection for cartridge
• Body - Anodized aluminum with authentic wood accent
• Button - Single button for power and voltage control
• Bottom - Magnetic charging contact points
• LEDs - 3 indicator lights near button

Available Wood Finishes

Variant	Wood Type	Aluminum
White/Beechwood	Beechwood	White
Slate/Blackwood	Blackwood	Slate
Slate/Walnut	Walnut	Slate

Each Craftsman features unique wood grain patterns—no two units are exactly alike.

Getting Started

Initial Charge

Before first use, fully charge your Craftsman:

1. Locate the magnetic charging contacts on the device bottom
2. Align the magnetic USB cable with the contacts
3. The cable will snap into place magnetically
4. Connect to any USB power source (computer, wall adapter, power bank)
5. LED indicators will show charging progress
6. Full charge takes approximately 45-60 minutes
7. All 3 LEDs illuminate steadily when fully charged

Note: While you can use the Craftsman with a partial charge, a full initial charge helps optimize battery longevity.

Understanding the LED Indicators

The Craftsman uses 3 LED lights to communicate:

LED Status	Meaning
3 LEDs lit	70-100% battery
2 LEDs lit	30-70% battery
1 LED lit	10-30% battery
1 LED flashing	Low battery, charge soon
LEDs pulsing	Charging in progress
All LEDs steady	Fully charged

Powering On/Off

• Turn On: Click the button 5 times rapidly (within 2 seconds)
• Turn Off: Click the button 5 times rapidly (within 2 seconds)
• LEDs will flash to confirm power state change

Installing a Cartridge

Attaching Your Cartridge

1. Ensure your 510 cartridge is compatible (standard width and threading)
2. Hold the cartridge by its body (not the mouthpiece)
3. Align the threaded base with the 510 connection on the Craftsman
4. Gently screw the cartridge clockwise until snug
5. Do not over-tighten—finger-tight is sufficient

Removing a Cartridge

1. Hold the Craftsman body firmly
2. Grasp the cartridge by its body
3. Gently unscrew counterclockwise
4. Store cartridge properly when not in use

Cartridge Compatibility

The Craftsman works with most standard 510 thread cartridges:

• Standard-width 510 cartridges (recommended)
• Most pre-filled oil cartridges
• Refillable 510 tanks

Note: Extra-wide or unusually shaped cartridges may not fit properly.

Voltage Settings

The Craftsman offers four precise voltage levels to customize your experience.

Voltage Levels Explained

Voltage	LED Color	Experience	Best For
2.4V	White	Maximum flavor, minimal vapor	Thin oils, terpene preservation, subtle effects
2.8V	Blue	Balanced flavor, light vapor	Most cartridges, flavor focus
3.2V	Green	Good vapor, moderate flavor	Balanced experience, medium-thick oils
3.6V	Red	Maximum vapor, intense effects	Thick distillates, large clouds

Changing Voltage

1. With device powered on, click button 3 times rapidly
2. LED will display current voltage color
3. Each subsequent 3-click cycles to next voltage
4. Cycle order: White → Blue → Green → Red → White
5. Stop at your desired setting

Voltage Recommendations by Oil Type

Oil Consistency	Recommended Voltage
Very thin (runny)	2.4V (White)
Thin to medium	2.4V-2.8V (White/Blue)
Standard	2.8V-3.2V (Blue/Green)
Thick distillate	3.2V-3.6V (Green/Red)
Very thick/cold weather	3.6V (Red)

Usage Instructions

Basic Operation

1. Power on: 5 clicks
2. Select voltage: 3 clicks to view/change
3. Vape: Press and hold button while inhaling
4. Release: Let go of button, continue brief inhale
5. Power off: 5 clicks when finished

Draw Technique

For best results:

• Take slow, steady draws (3-5 seconds)
• Don't pull too hard—gentle suction works best
• Start at lower voltage and increase if needed
• Wait 10-15 seconds between draws to prevent overheating

Session Timeout

The Craftsman includes automatic safety cutoff:

• Continuous draw limit: approximately 10 seconds
• Device will stop heating to prevent overheating
• Simply release and press again to continue

Charging

How to Charge

1. Power off the Craftsman (recommended but not required)
2. Align magnetic USB cable with bottom contacts
3. Cable will snap into place when properly aligned
4. Plug into power source
5. LEDs indicate charging progress
6. Remove when fully charged (all 3 LEDs steady)

Charging Specifications

Specification	Value
Charge time	45-60 minutes
Input	USB magnetic
Battery type	Lithium-ion
Capacity	300mAh

Charging Best Practices

• Charge before battery fully depletes
• Avoid leaving on charger for extended periods after full
• Use quality USB power sources
• Room temperature charging is ideal
• Keep magnetic contacts clean for reliable charging

Using the Base Charger (Accessory)

If you have the Vessel Base Charger:

1. Connect Base Charger to USB power
2. Place Craftsman into the charging cradle
3. Magnetic alignment ensures proper connection
4. LEDs indicate charging status
5. Remove when fully charged

Wood Care & Maintenance

The Craftsman features authentic wood that requires special care to maintain its beauty.

Daily Wood Care

Do:

• Wipe with a soft, dry microfiber cloth after use
• Handle by the aluminum portions when possible
• Store in a protective case when not in use
• Keep in a stable, room-temperature environment

Don't:

• Expose to excessive moisture or humidity
• Leave in direct sunlight for extended periods
• Use chemical cleaners, solvents, or alcohol on wood
• Submerge in water
• Apply furniture polish or oils without manufacturer guidance

Cleaning the Wood

1. Use only a soft, dry cloth
2. Wipe gently in the direction of the grain
3. For stubborn marks, very slightly dampen cloth with water
4. Dry immediately and thoroughly
5. Allow to air dry completely before storage

Natural Wood Aging

The authentic wood will develop a natural patina over time:

• Slight color changes are normal
• Wood may darken or develop character with use
• This aging is considered desirable by many users
• The patina reflects authentic natural material

Protecting the Wood

• Use a protective case (Rover Case compatible)
• Avoid extreme temperature fluctuations
• Don't leave in cars on hot or cold days
• Keep away from heaters and air conditioning vents
• Store in a consistent environment

Aluminum Care & Cleaning

Regular Cleaning

Weekly or as needed:

1. Wipe aluminum body with soft, dry cloth
2. For fingerprints, slightly damp cloth works
3. Dry immediately after cleaning
4. Avoid getting moisture near button or contacts

Cleaning the 510 Connection

1. Remove cartridge from device
2. Inspect 510 connection for oil residue
3. Use cotton swab lightly dampened with isopropyl alcohol
4. Clean the 510 pin and threads
5. Wipe connection area dry
6. Let air dry completely before reinserting cartridge

Cleaning Magnetic Charging Contacts

1. Inspect contacts on device bottom
2. Use dry cotton swab to remove debris
3. For stubborn residue, slightly damp swab
4. Dry thoroughly before charging
5. Also clean cable contacts regularly

Storage

Short-Term Storage

• Store at room temperature
• Keep upright when possible
• Remove cartridge if not using for several days
• Power off to preserve battery

Long-Term Storage

• Remove cartridge completely
• Charge to approximately 50%
• Store in protective case
• Keep in cool, dry location
• Avoid extreme temperatures
• Check and charge every few months

Travel Tips

• Use a protective case (Rover Case recommended)
• Keep in carry-on luggage (batteries not allowed in checked bags)
• Remove cartridge for flights
• Be aware of local laws at destination

Compatible Accessories

Works With

• Vessel Base Charger - Elegant desktop magnetic charging dock
• Vessel Rover Case - Protective carrying case for Craftsman

Accessory Benefits

Base Charger:

• Convenient desktop charging
• Magnetic alignment for easy docking
• Keeps Craftsman organized and charged

Rover Case:

• Protects wood and aluminum finish
• Secure storage during transport
• Maintains device appearance

Safety Information

General Safety

• Adult use only (21+)
• Keep away from children and pets
• Do not use if device appears damaged
• Stop use immediately if device overheats
• Do not attempt to open or modify the device
• Use only for intended purpose

Battery Safety

• Use only the included magnetic USB cable or Vessel accessories
• Do not leave charging unattended overnight
• Do not charge near flammable materials
• Do not expose to water or extreme moisture
• Do not puncture, crush, or incinerate
• Dispose of properly according to local battery regulations

Wood-Specific Safety

• Do not expose to open flames
• Keep away from high heat sources
• Avoid contact with solvents or harsh chemicals
• The wood is flammable—exercise appropriate caution

Usage Safety

• Do not vape and drive
• Be aware of local laws and regulations
• Do not use near oxygen tanks or flammable gases
• Stop use if you experience any adverse reactions
• Clean device regularly to ensure safe operation

Troubleshooting

Device Won't Turn On

1. Check charge level - Connect to charger for 30+ minutes
2. Verify click speed - 5 clicks within 2 seconds
3. Check magnetic connection - Ensure cable is properly aligned
4. Try different power source - Test with another USB port/adapter
5. Contact support - If still unresponsive, may need warranty service

No Vapor Production

1. Confirm device is on - LED should light when button pressed
2. Check cartridge - Ensure properly threaded and making contact
3. Try different cartridge - Isolate whether issue is device or cartridge
4. Increase voltage - Some oils need higher settings
5. Clean connection - Oil buildup can interrupt contact

Weak or Inconsistent Vapor

1. Charge battery - Low battery affects performance
2. Increase voltage - Try higher setting
3. Clean 510 connection - Ensure good electrical contact
4. Check cartridge - May be clogged or near empty
5. Allow cooling - Overheating can reduce performance

Cartridge Doesn't Fit

If your cartridge doesn't fit:

• Confirm it has 510 threading (not proprietary)
• Check cartridge width—extra-wide cartridges may not fit
• Ensure nothing is obstructing the 510 connection
• Try a different cartridge to verify compatibility

Magnetic Charger Issues

If the charger isn't working:

1. Clean contacts on device and cable
2. Ensure proper magnetic alignment
3. Try different USB power source
4. Check for debris in magnetic connection
5. Verify cable isn't damaged

Rapid LED Flashing

This indicates:

• Low battery - Charge immediately
• Short circuit detected - Try different cartridge
• Connection issue - Clean 510 connection and retry

Device Getting Hot

Normal warmth during use is expected. If device becomes uncomfortably hot:

1. Stop using immediately
2. Remove cartridge
3. Let device cool completely
4. Check cartridge for damage or leaks
5. If problem persists, contact Vessel support

Wood Damage

If wood shows damage:

• Minor scratches may blend with natural patina
• Do not attempt to sand or refinish
• Contact Vessel for guidance on severe damage
• Consider protective case to prevent future damage

Specifications

Specification	Value
Battery Capacity	300mAh
Voltage Settings	2.4V, 2.8V, 3.2V, 3.6V
Threading	510
Charging Port	USB magnetic
Dimensions	4.3"L x 0.5"D
Weight	29g (1.0 oz)
Body Material	Anodized aluminum
Accent Material	Authentic wood (Beechwood, Blackwood, or Walnut)
LED Indicators	3 (battery + voltage)
Airflow	Unrestricted
Warranty	6 months

Warranty Information

Coverage

Vessel provides a 6-month limited warranty covering:

• Manufacturing defects
• Component failure under normal use
• Electrical malfunctions not caused by user damage

Not Covered

• Physical damage (drops, cracks, dents)
• Water or liquid damage
• Wood weathering, patina, or natural aging
• Unauthorized modifications
• Normal wear and tear
• Damage from non-compatible accessories
• Issues caused by improper cleaning or maintenance
• Damage from extreme temperatures

Product Registration

Register your Craftsman at vesselbrand.com/pages/registration:

• Activates warranty coverage
• Enables faster support responses
• Provides access to exclusive updates

Making a Claim

1. Visit vesselbrand.com/warranty
2. Provide proof of purchase
3. Describe the issue in detail
4. Include photos if relevant
5. Follow provided instructions for return/replacement

Tips for Best Experience

Maximize Battery Life

• Use lower voltage when possible
• Power off when not in use
• Don't drain completely before charging
• Store at room temperature
• Keep magnetic contacts clean

Optimize Flavor

• Start at 2.4V and increase only as needed
• Keep cartridge and connection clean
• Use fresh cartridges
• Take slow, steady draws

Preserve Wood Beauty

• Wipe after each use
• Use protective case
• Avoid moisture and direct sunlight
• Embrace natural patina development

Extend Device Life

• Clean regularly
• Avoid drops and impacts
• Store properly
• Don't overtighten cartridges
• Handle by aluminum when possible

Get Best Vapor

• Higher voltage for thicker oils
• Allow cartridge to warm up in cold weather
• Keep battery charged above 30%
• Clean connection weekly

Related: Vessel Craftsman Review