THEVAPERSGUIDE

Lookah Dragon Egg Manual: Setup, Usage & Troubleshooting: Complete Setup & Usage Guide

Complete Lookah Dragon Egg user guide with step-by-step setup instructions, voltage settings, troubleshooting tips, and maintenance advice.

By The Vaper's Guide Team
(Updated January 2, 2026)
Dragon Egg

Lookah

Dragon Egg User Manual

Quick Start Guide

  1. 1Fully charge the device using a USB-C cable (not included) for approximately 90 minutes
  2. 2Click the power button 5 times rapidly to turn on the device
  3. 3Add a small amount of concentrate to the quartz cup coil
  4. 4Press and hold the power button to heat - LED indicates current voltage setting
  5. 5Inhale through the glass straw mouthpiece when vapor forms
  6. 6Release button and use magnetic carb cap to control airflow
  7. 7Click 5 times to power off when finished

Overview

The Lookah Dragon Egg is a compact, palm-sized electric dab rig designed for portable concentrate consumption. This manual provides complete instructions for operating, maintaining, and troubleshooting your Dragon Egg to ensure optimal performance and longevity.

The Dragon Egg features a 950mAh rechargeable battery, three voltage settings, and a durable perspex bubbler that provides water filtration in a pocket-friendly package. Understanding proper operation and care will maximize your experience with this device.

What's in the Box

Your Lookah Dragon Egg kit includes:

  • 1x Lookah Dragon Egg device (base unit with battery)
  • 1x Perspex bubbler with magnetic flip cap
  • 1x Tempered glass straw mouthpiece
  • 1x Detachable downstem
  • 2x Type C 710 quartz cup coils (one pre-installed)
  • 1x User manual
  • 1x Warranty card

Note: USB-C charging cable and dab tool are NOT included. You will need to provide your own USB-C cable for charging and a dab tool for loading concentrates.

Getting Started

Initial Charge

Before first use, fully charge your Dragon Egg:

  1. Locate the USB-C charging port on the base of the device
  2. Connect a USB-C cable (not included) to the port
  3. Connect the other end to a USB power adapter (5V recommended)
  4. The LED will illuminate during charging
  5. Charge for approximately 90 minutes until fully charged
  6. Disconnect when charging is complete

Important: Use only 5V USB adapters. Higher voltage chargers may damage the battery.

Assembling the Device

  1. Ensure a 710 quartz cup coil is threaded into the base (one comes pre-installed)
  2. Attach the perspex bubbler to the base - it connects magnetically
  3. Insert the tempered glass straw into the mouthpiece opening
  4. Add water to the bubbler chamber (fill to just above the percolator holes)
  5. Attach the magnetic flip cap to the top opening

Powering On/Off

  • Turn On: Click the power button 5 times rapidly within 2 seconds
  • Turn Off: Click the power button 5 times rapidly within 2 seconds
  • Auto-Off: Device automatically powers off after 5 minutes of inactivity

When powered on, the LED display will illuminate showing battery level and current voltage setting.

Usage Instructions

Basic Operation

  1. Power on the device with 5 rapid clicks
  2. Select voltage by double-clicking to cycle through settings
  3. Load concentrate by opening the magnetic flip cap and using a dab tool to place a rice-grain sized amount onto the quartz cup coil
  4. Close the cap and position the device upright
  5. Press and hold the power button to begin heating
  6. Wait for preheat - the device has a 10-second preheat cycle
  7. Inhale slowly through the glass straw as vapor forms
  8. Release the button when finished with your draw
  9. Use the carb cap to control airflow and clear remaining vapor

Voltage/Temperature Settings

The Dragon Egg offers three voltage settings accessed by double-clicking the power button:

SettingVoltageLED ColorTemperatureBest For
Low3.2VGreen~350°FMaximum flavor, smooth hits
Medium3.6VBlue~400°FBalanced flavor and vapor
High4.0VWhite~450°FMaximum vapor production

Tips for voltage selection:

  • Start low and increase if desired
  • Terpy concentrates taste best on low settings
  • Thicker concentrates may require medium or high settings
  • High settings consume concentrate faster

Using the Preheat Function

The Dragon Egg includes a 10-second automatic preheat:

  1. Press and hold the power button
  2. The device enters preheat mode, gently warming the concentrate
  3. After 10 seconds, full heating engages
  4. Begin inhaling when you see vapor forming
  5. The preheat helps melt concentrate evenly for smoother hits

Water Level

Proper water level ensures optimal filtration:

  1. Remove the mouthpiece and flip cap
  2. Add water through the top opening
  3. Fill until water just covers the percolator holes
  4. Do not overfill - water should not splash into the mouthpiece
  5. Test by drawing without firing - if water reaches your mouth, pour some out

Charging

Charging Procedure

  1. Connect a USB-C cable to the charging port on the device base
  2. Connect to a 5V USB power source
  3. The LED indicator shows charging status
  4. Full charge takes approximately 90 minutes
  5. Disconnect when fully charged

Battery Indicator

The LED display shows approximate battery level:

  • Full illumination: 75-100% charge
  • Partial illumination: 25-75% charge
  • Low/flashing: Below 25% - charge soon

Charging Safety

  • Use only 5V USB adapters
  • Do not charge unattended for extended periods
  • Avoid charging in extreme temperatures
  • Do not use damaged cables
  • Disconnect promptly when fully charged

Care & Maintenance

Daily Cleaning

After each session:

  1. Allow the device to cool completely
  2. Use a cotton swab to wipe excess residue from the coil while slightly warm
  3. Wipe the mouthpiece with a clean cloth
  4. Empty and rinse the bubbler water

Deep Cleaning (Weekly)

For thorough cleaning:

Bubbler:

  1. Remove the bubbler from the base
  2. Empty all water
  3. Fill with isopropyl alcohol (90%+ recommended)
  4. Let soak for 15-30 minutes
  5. Rinse thoroughly with warm water
  6. Allow to dry completely before reassembly

Coil:

  1. Remove the coil from the base by unscrewing
  2. Soak in isopropyl alcohol for 30 minutes
  3. Use a cotton swab to remove stubborn residue
  4. Rinse with warm water
  5. Allow to dry completely before reinstalling

Base:

  1. Wipe exterior with a slightly damp cloth
  2. Do not submerge the base in water - it contains electronics
  3. Clean the 710 threading with a dry cotton swab

Storage

For best results when storing your Dragon Egg:

  • Empty and dry the bubbler
  • Remove the coil if storing long-term
  • Store upright in a cool, dry place
  • Keep away from direct sunlight
  • Store in the original packaging or a protective case

Coil Replacement

Replace the coil when:

  • Flavor becomes muted or off
  • Vapor production decreases
  • Visible buildup cannot be cleaned
  • Physical damage is visible

To replace:

  1. Unscrew the old coil from the base (counter-clockwise)
  2. Dispose of the old coil properly
  3. Thread the new coil into place (clockwise)
  4. Hand-tighten only - do not overtighten

Safety Information

General Safety

  • Age Restriction: This device is for adult use only (21+)
  • Keep Away from Children: Store securely away from minors and pets
  • Intended Use: Use only with legal concentrates in your jurisdiction
  • Supervision: Do not leave the device unattended while heating

Battery Safety

  • Use only the recommended charging specifications (5V USB-C)
  • Do not expose to extreme temperatures
  • Do not puncture, crush, or disassemble the battery
  • Stop using if the device becomes excessively hot
  • Dispose of properly according to local regulations

Usage Safety

  • Allow cooling between sessions to prevent overheating
  • Do not touch the coil during or immediately after use
  • Keep water in the bubbler to cool vapor
  • Use on stable surfaces to prevent tipping
  • Do not operate while driving or operating machinery

Built-in Protections

The Dragon Egg includes several safety features:

  • Overcharge Protection: Prevents battery damage from extended charging
  • Short Circuit Protection: Stops operation if a short is detected
  • Overheat Protection: Pauses heating if temperature becomes excessive
  • Auto-Shutoff: Powers off after 5 minutes of inactivity

Warranty Information

The Lookah Dragon Egg is covered by a limited manufacturer's warranty:

  • Duration: 3 months from date of purchase
  • Coverage: Defects in materials and workmanship under normal use
  • Exclusions: Physical damage, water damage, misuse, unauthorized modifications, coils (consumable)

To make a warranty claim, contact Lookah customer support with proof of purchase.

Related: Lookah Dragon Egg Review

Troubleshooting

Q:Device won't turn on

A:Ensure the battery is charged. Connect a USB-C cable and charge for at least 30 minutes. Click the power button 5 times rapidly within 2 seconds. If the device still won't respond, try a different USB-C cable or charging adapter.

Q:No vapor production

A:Check that concentrate is loaded in the coil. Verify the coil is properly threaded into the base. Try a higher voltage setting. Ensure the coil is not clogged with residue - clean or replace if necessary.

Q:Harsh or burnt taste

A:Lower the voltage setting for a cooler hit. Ensure concentrate is not overloaded in the coil. Clean the coil if buildup has accumulated. Replace the coil if it shows signs of wear or discoloration.

Q:Device gets too hot

A:Allow cooling time between sessions. The device has built-in protection and will pause if overheating occurs. Avoid chain-vaping multiple sessions back-to-back.

Q:Water in the mouthpiece

A:Do not overfill the bubbler chamber. Keep the device upright during use. Empty and dry the bubbler if water reaches the mouthpiece area.

Specifications
Battery Capacity950mAh
Voltage Settings3.2V, 3.6V, 4.0V
Temperature Range350-450°F
ChargingUSB-C (cable not included)
Charge Time~90 minutes
Sessions Per Charge20-25 cycles
Dimensions168mm x 55mm x 55mm
Chassis MaterialZinc-Alloy
Bubbler MaterialFood-Grade Perspex
Coil Type710 Quartz Cup (Type C)
Resistance Range0.6-5.0 ohm
Coil ConnectionThreaded 710

Frequently Asked Questions

How do I change the voltage setting?

Click the power button 2 times quickly to cycle through the three voltage settings. Green LED indicates 3.2V (low), blue indicates 3.6V (medium), and white indicates 4.0V (high).

Can I use this with 510 cartridges?

No, the Dragon Egg is designed specifically for concentrate use with 710-threaded quartz cup coils. It is not compatible with standard 510-threaded cartridges.

How often should I replace the coil?

Coil lifespan depends on usage and maintenance. With regular cleaning, coils typically last 2-4 weeks of daily use. Replace when flavor degrades, vapor production decreases, or visible buildup cannot be cleaned.

Is the bubbler dishwasher safe?

No, hand wash the perspex bubbler only. Use warm water and isopropyl alcohol for cleaning. Avoid harsh detergents or abrasive scrubbing that could scratch the perspex.

What type of concentrates work best?

The Dragon Egg works well with wax, shatter, budder, crumble, and live resin. Avoid extremely runny oils or distillates that may leak through the coil. Start with rice-grain sized amounts.