THEVAPERSGUIDE
Manual/Accessory

HoneyStick Fuego FIRE Electric Lighter Manual: Setup, Usage & Troubleshooting: Complete Setup & Usage Guide

Complete HoneyStick Fuego FIRE Electric Lighter user guide with step-by-step setup instructions, voltage settings, troubleshooting tips, and maintenance advice.

By The Vaper's Guide Team
(Updated December 19, 2025)
HoneyStickmanuallighterelectricplasma arcdiscontinued
Fuego FIRE Electric Lighter

HoneyStick

Fuego FIRE Electric Lighter User Manual

Quick Start Guide

  1. 1Fully charge before first use
  2. 2Open the flip-top cover
  3. 3Press button to activate arc
  4. 4Touch arc to item to ignite
  5. 5Close cover when done

Overview

The HoneyStick Fuego FIRE Electric Lighter used plasma arc technology for flameless, windproof ignition. USB rechargeable with no fuel needed.

Note: This product has been discontinued.

How It Works

Instead of flame, the Fuego creates visible electric arcs between electrodes:

  • Completely windproof
  • No fuel required
  • USB rechargeable
  • Instant ignition

Getting Started

Initial Charge

  1. Connect USB cable to lighter
  2. Connect to power source
  3. LED indicates charging
  4. Full charge: 1-2 hours

Basic Operation

  1. Open flip-top cover
  2. Press button to activate arcs
  3. Touch arcs to material to ignite
  4. Release button when done
  5. Close cover

Safety Features

  • Cover interlock: Arcs only work when open
  • Auto-shutoff: Prevents overheating
  • No hot surfaces: After use, quickly cools
  • No fuel leaks: Electric, not gas

What It Can Light

Ideal for:

  • Candles
  • Incense
  • Paper
  • Small kindling

Limitations:

  • Large items may not fit between electrodes
  • Not suitable for items too thick for electrode gap

Charging

When to Charge

  • When arcs appear weak
  • When button press yields no arc
  • Preventatively before heavy use

Charging Process

  1. Connect USB cable
  2. LED indicates charging
  3. Full charge: 1-2 hours
  4. Hundreds of lights per charge

Care & Maintenance

Electrode Care

  • Keep electrodes clean
  • Wipe with dry cloth if dirty
  • Don't damage electrode tips

General Care

  • Store with cover closed
  • Keep dry
  • Avoid drops

Safety Information

  • Keep away from children
  • Don't touch electrodes during use
  • Don't use near flammable gases
  • Close cover when not in use
  • Don't attempt to repair

Advantages Over Flame

FeatureElectricTraditional
WindImmuneAffected
FuelNoneRequired
RefillsChargeBuy fuel
EcoRechargeableDisposable waste

Related: Fuego FIRE Electric Lighter Review

Troubleshooting

Q:Arc not appearing

A:Ensure battery is charged. Open cover fully. Press button firmly.

Q:Weak arc

A:Charge the battery. Clean electrodes if dirty.

Specifications
TypeElectric Plasma Arc
IgnitionDual Arc
ChargingUSB
Wind Resistance100% windproof
StatusDiscontinued

Frequently Asked Questions

How do I turn on the Fuego FIRE Electric Lighter?

Press the power button 5 times rapidly within 2 seconds. The device will vibrate or the display will illuminate to confirm it's on.

How do I charge the Fuego FIRE Electric Lighter?

Connect the included charging cable to the device and a USB power source. The indicator will show charging status. Allow 1-2 hours for a full charge.

Why is my Fuego FIRE Electric Lighter not working?

First, ensure the device is charged and powered on. Check all connections are secure. If using cartridges, verify the cartridge is properly seated. Try cleaning the connection points with a cotton swab.

How do I clean the Fuego FIRE Electric Lighter?

Disconnect all attachments and use a dry cotton swab to clean connection points. For chambers, use isopropyl alcohol on a cotton swab when cool. Never submerge the device in liquid.

Where can I buy replacement parts for the Fuego FIRE Electric Lighter?

Replacement parts and accessories are available from authorized HoneyStick retailers and the official HoneyStick website.