THEVAPERSGUIDE

HoneyStick Elf Canndual Pro Manual: Setup, Usage & Troubleshooting: Complete Setup & Usage Guide

Complete HoneyStick Elf Canndual Pro user guide with step-by-step setup instructions, voltage settings, troubleshooting tips, and maintenance advice.

By The Vaper's Guide Team
(Updated January 5, 2026)
Elf Canndual Pro

HoneyStick

Elf Canndual Pro User Manual

Quick Start Guide

  1. 1Fully charge the battery
  2. 2Insert up to two 510 cartridges
  3. 3Close the concealer cover
  4. 4Click 5 times to turn on
  5. 5Select cartridge on display
  6. 6Inhale to vape

Overview

The HoneyStick Elf Canndual Pro was a premium dual-cartridge battery featuring a digital display for precise voltage control and battery monitoring. It represented the top of HoneyStick's dual-cart lineup.

Note: This product has been discontinued. This manual is preserved for existing owners.

What's in the Box

  • Elf Canndual Pro Battery
  • USB-C Charging Cable
  • User Manual

Getting Started

Initial Charge

  1. Connect USB-C cable to charging port
  2. Connect to USB power source
  3. Display shows charging progress
  4. Full charge: approximately 2-3 hours
  5. Display shows 100% when complete

Loading Cartridges

  1. Open the concealer cover/lid
  2. Insert cartridges into the two 510-threaded slots
  3. Press gently until secure
  4. Close the cover
  5. Display will recognize installed cartridges

Powering On/Off

  • Turn On: Click button 5 times rapidly
  • Turn Off: Click button 5 times rapidly
  • Display activates on power-on

Digital Display

Display Information

The screen shows:

  • Voltage: Current setting (2.0V - 4.0V)
  • Battery: Percentage remaining
  • Cart Selection: Which cartridge (1 or 2) is active

Reading the Display

  • Battery icon or percentage indicates charge level
  • Voltage number shows current power output
  • Cart indicator shows selected cartridge slot

Dual Cartridge Operation

Switching Between Cartridges

  1. View the display to see current selection
  2. Use the cartridge selector button
  3. Display updates to show new selection
  4. Inhale from the corresponding mouthpiece port

Single Cartridge Use

The Canndual Pro works with one or two cartridges. If using one:

  • Install in either slot
  • Select that slot on the display
  • Unused slot remains inactive

Voltage Control

Adjusting Voltage

  1. View current voltage on display
  2. Use voltage adjustment buttons (+/-)
  3. Adjust in 0.1V increments
  4. Range: 2.0V to 4.0V
  5. Display updates in real-time

Voltage Guidelines

Voltage RangeBest For
2.0V - 2.5VMaximum flavor, thin oils
2.6V - 3.2VBalanced performance
3.3V - 3.7VMore vapor, standard oils
3.8V - 4.0VMaximum vapor, thick oils

Setting Different Voltages

While the device remembers your last voltage:

  • You may want different voltages for different cartridges
  • Adjust voltage after switching cartridges
  • Lower for flavor carts, higher for thick oils

Preheat Function

Activating Preheat

  1. With device on, double-click the power button
  2. Display indicates preheat mode active
  3. Device preheats at low voltage for ~15 seconds
  4. Take your draw after preheat completes

When to Preheat

  • Cold environments
  • Thick concentrates
  • Cartridges sitting idle
  • First use of the day

Usage Instructions

Basic Operation

  1. Power on (5 clicks)
  2. Check display for battery level
  3. Select desired cartridge
  4. Adjust voltage if needed
  5. Preheat if desired (double-click)
  6. Inhale to vape (draw-activated)

Optimizing Your Experience

  • Start at lower voltage, increase as needed
  • Match voltage to oil viscosity
  • Use preheat for stubborn cartridges
  • Monitor battery level on display

Charging

How to Charge

  1. Connect USB-C cable
  2. Display shows charging status
  3. Battery percentage increases during charge
  4. Full charge: 2-3 hours
  5. 100% indicates complete

Battery Life

The 700mAh capacity provides:

  • 300-450 puffs per charge
  • 1-4 days depending on use
  • Longer life at lower voltages

Charging Best Practices

  • Use included or quality USB-C cables
  • Avoid charging above 5V/2A
  • Don't leave charging overnight unattended
  • Charge before complete depletion

Care & Maintenance

Display Care

  • Keep display clean and dry
  • Avoid scratching the screen
  • Don't press excessively on display
  • Clean with soft, dry cloth only

General Cleaning

Weekly:

  • Remove cartridges
  • Clean 510 connections with dry cotton swab
  • Wipe chamber and exterior
  • Clean around buttons

Monthly:

  • Deep clean connections with isopropyl alcohol
  • Allow complete drying
  • Inspect all moving parts

Storage

  • Store with cover closed
  • Keep display protected
  • Remove cartridges for long-term storage
  • Maintain 40-60% charge for storage

Safety Information

  • Keep away from children and pets
  • Do not use if damaged
  • Stop use if overheating occurs
  • For adult use only (21+)
  • Dispose of properly per local regulations

Troubleshooting

Display Issues

Blank display:

  1. Check battery charge
  2. Power on with 5 clicks
  3. Connect to charger
  4. If still blank, contact support

Incorrect readings:

  1. Power cycle the device
  2. Clean connections
  3. Try different cartridges

No Vapor

  1. Verify device is on (check display)
  2. Confirm correct cartridge selected
  3. Check cartridge is properly seated
  4. Verify cartridge has oil
  5. Adjust voltage higher
  6. Use preheat function

Cartridge Not Detected

  1. Remove and reseat cartridge
  2. Clean 510 connection
  3. Try other cartridge slot
  4. Test with different cartridge

Specifications

SpecificationValue
Battery Capacity700mAh
Cartridge Slots2
DisplayDigital LCD
Voltage Range2.0V - 4.0V
Voltage Increments0.1V
Threading510
ChargingUSB-C
ActivationDraw-activated

Product Status

This product has been discontinued by HoneyStick. For current options, visit the HoneyStick brand page.

Related: Read our Elf Canndual Pro Review for detailed performance insights.

Troubleshooting

Q:Display not working

A:Ensure battery is charged. Click 5 times to power on. If display remains blank, the device may need service.

Q:Wrong cartridge firing

A:Check the display to confirm which cartridge is selected. Use the selector to switch to desired cartridge.

Q:Voltage not changing

A:Use the adjustment buttons while viewing the display. The voltage should update in real-time.

Specifications
Battery Capacity700mAh
Cartridge Slots2 (dual)
DisplayDigital (voltage + battery)
Voltage Range2.0V - 4.0V
Threading510 Thread
ChargingUSB-C
PreheatYes
StatusDiscontinued

Frequently Asked Questions

What does the display show?

The digital display shows current voltage setting, battery percentage, and which cartridge (1 or 2) is selected.

Can I set different voltages for each cartridge?

The voltage setting applies to whichever cartridge is currently selected. You'll need to adjust when switching.

How precise is the voltage control?

The Canndual Pro offers 0.1V increment adjustments from 2.0V to 4.0V.