THEVAPERSGUIDE

HoneyStick Dissim Slim Torch Lighter Manual: Setup, Usage & Troubleshooting: Complete Setup & Usage Guide

Complete HoneyStick Dissim Slim Torch Lighter user guide with step-by-step setup instructions, voltage settings, troubleshooting tips, and maintenance advice.

By The Vaper's Guide Team
(Updated January 1, 2026)
Dissim Slim Torch Lighter

HoneyStick

Dissim Slim Torch Lighter User Manual

Quick Start Guide

  1. 1Fill with butane fuel if needed
  2. 2Adjust flame height with dial
  3. 3Press and hold ignition button
  4. 4Direct torch flame to target
  5. 5Release button to extinguish

Overview

The HoneyStick Dissim Metal Slim Torch Lighter is a compact, powerful torch lighter perfect for dabbing, cigars, and any application requiring high heat. The slim metal construction and adjustable flame make it a versatile tool.

Torch vs. Soft Flame

Why Torch?

Torch lighters produce a focused, high-temperature flame:

  • Temperature: ~2,500°F (1,370°C)
  • Wind resistant: Jet flame resists wind
  • Focused: Directed heat application
  • Fast: Heats surfaces quickly

Best Uses

  • Heating dab rig bangers
  • Lighting cigars
  • Outdoor use (wind resistant)
  • Any high-heat application

Getting Started

Initial Setup

  1. Remove from packaging
  2. Check fuel level
  3. Locate flame adjustment dial
  4. Test ignition (away from face)

First Refill (If Empty)

  1. Turn lighter upside down
  2. Bleed existing air from valve
  3. Press butane canister into refill valve
  4. Fill in short 2-3 second bursts
  5. Wait 3 minutes before igniting

Basic Operation

Igniting

  1. Ensure flame adjuster is set appropriately
  2. Press and hold ignition button
  3. Torch flame ignites
  4. Direct flame toward target
  5. Release button to extinguish

Flame Adjustment

Locate the flame adjustment dial (usually on bottom or side):

  • Higher: Turn dial toward "+"
  • Lower: Turn dial toward "-"
  • Start low and increase as needed
  • Don't set too high (wastes fuel, unsafe)

Using for Dabbing

Heating a Banger

  1. Ensure banger is secure on rig
  2. Ignite torch
  3. Direct flame at bottom of banger
  4. Heat evenly, moving flame around
  5. Heat for 30-60 seconds (varies by banger)
  6. Wait for cool-down before dabbing (20-60 seconds)

Temperature Tips

  • Quartz: Heat longer, cools slower
  • Titanium: Heats fast, cools fast
  • Overheating burns concentrate
  • Underheating wastes material
  • Experiment to find sweet spot

Low-Temp Dabbing

  1. Heat banger until red glow
  2. Let cool 45-60 seconds
  3. Insert concentrate
  4. Cap and inhale

Refilling Instructions

When to Refill

  • Flame weakens or won't ignite
  • Multiple attempts needed for ignition
  • Visible low fuel

Proper Refilling Technique

  1. Bleed the tank:

    • Use small screwdriver or tool
    • Press refill valve until hissing stops
    • Releases old gas and air
  2. Position lighter:

    • Turn completely upside down
    • Refill valve facing up
  3. Insert butane:

    • Press canister nozzle firmly into valve
    • Use correct adapter if needed
  4. Fill in bursts:

    • 2-3 second bursts
    • Not continuous flow
    • Stop when fuel sprays back
  5. Wait before use:

    • 3-5 minutes minimum
    • Let reach room temperature

Butane Quality Matters

  • Use triple-refined or better
  • Low-quality butane clogs jets
  • Impure butane causes sputtering
  • Brand-name butane recommended

Flame Optimization

Blue Flame = Good

  • Consistent blue flame indicates proper function
  • Focused jet with minimal flicker
  • Steady heat output

Yellow Flame = Problem

Yellow or orange flame indicates:

  • Air in fuel system
  • Impure butane
  • Clogged jet

Fix: Bleed tank completely, refill with quality butane.

Flame Height Guide

SettingBest For
LowCigars, pipes
MediumGeneral dabbing
HighLarge bangers, quick heating

Care & Maintenance

Regular Maintenance

  • Keep jet nozzle clean
  • Use compressed air on jets monthly
  • Wipe exterior with dry cloth
  • Check flame adjustment periodically

Storage

  • Store in cool, dry place
  • Keep away from heat sources
  • Don't leave in vehicles
  • Ensure extinguished before storing

Troubleshooting Table

IssueCauseSolution
No ignitionEmpty tankRefill
Weak flameLow fuelRefill
Yellow flameAir/impuritiesBleed and refill
SputteringAir bubblesBleed and refill
No sparkPiezo issueMay need service

Safety Information

During Use

  • Keep away from face when igniting
  • Never look directly into jet
  • Use in ventilated area
  • Don't use near flammable materials
  • Never leave unattended while lit

Torch-Specific Safety

  • Flame is extremely hot (~2,500°F)
  • Can cause severe burns
  • Keep away from skin, hair, clothing
  • Set down on heat-safe surface
  • Allow cool-down before storing

Storage & Handling

  • Keep away from children
  • Don't puncture or incinerate
  • Store away from heat sources
  • Don't carry in pocket when warm
  • Adult use only

Specifications

SpecificationDetail
Flame TypeSingle jet torch
Temperature~2,500°F (1,370°C)
ConstructionMetal
IgnitionPiezo electric
FuelButane
AdjustableYes (flame height)
RefillableYes

Related: Dissim Slim Torch Lighter Review

Troubleshooting

Q:Torch won't ignite

A:Check fuel level and refill if needed. Bleed air from tank. Ensure flame adjuster is not set too low.

Q:Flame is yellow/weak

A:Impure butane or air in tank. Bleed tank completely and refill with quality triple-refined butane.

Q:Flame sputters

A:Air in fuel line. Bleed tank and refill. Use quality butane only.

Specifications
TypeTorch Lighter
FlameSingle Jet Torch
MaterialMetal Construction
IgnitionPiezo Electric
FuelButane Gas
AdjustmentFlame Height Dial

Frequently Asked Questions

How do I turn on the Dissim Slim Torch Lighter?

Press the power button 5 times rapidly within 2 seconds. The device will vibrate or the display will illuminate to confirm it's on.

How do I charge the Dissim Slim Torch Lighter?

Connect the included charging cable to the device and a USB power source. The indicator will show charging status. Allow 1-2 hours for a full charge.

Why is my Dissim Slim Torch Lighter not working?

First, ensure the device is charged and powered on. Check all connections are secure. If using cartridges, verify the cartridge is properly seated. Try cleaning the connection points with a cotton swab.

How do I clean the Dissim Slim Torch Lighter?

Disconnect all attachments and use a dry cotton swab to clean connection points. For chambers, use isopropyl alcohol on a cotton swab when cool. Never submerge the device in liquid.

Where can I buy replacement parts for the Dissim Slim Torch Lighter?

Replacement parts and accessories are available from authorized HoneyStick retailers and the official HoneyStick website.