THEVAPERSGUIDE
Manual/Accessory

HoneyStick Dissim Slim Butane Lighter Manual: Setup, Usage & Troubleshooting: Complete Setup & Usage Guide

Complete HoneyStick Dissim Slim Butane Lighter user guide with step-by-step setup instructions, voltage settings, troubleshooting tips, and maintenance advice.

By The Vaper's Guide Team
(Updated December 22, 2025)
HoneyStickmanuallighterbutanesoft flame
Dissim Slim Butane Lighter

HoneyStick

Dissim Slim Butane Lighter User Manual

Buy Now

Quick Start Guide

  1. 1Fill with butane fuel if needed
  2. 2Open the protective cap
  3. 3Press and hold ignition button
  4. 4Inverted flame points down naturally
  5. 5Release button to extinguish

Overview

The HoneyStick Dissim Slim Butane Lighter features an innovative inverted soft flame design. The flame naturally points downward, making it ideal for lighting candles, bowls, and other items positioned below the lighter without awkward hand angles.

Inverted Flame Technology

How It Works

Unlike traditional lighters where the flame points upward:

  • Flame is angled to point downward
  • More natural lighting position
  • Keeps hand away from heat
  • Perfect for deep candles and bowls

Benefits

  • Ergonomic: Natural hand position
  • Safe: Heat stays away from hand
  • Versatile: Lights items at any angle
  • Elegant: Classic soft flame aesthetic

Getting Started

First Use

  1. Remove lighter from packaging
  2. Check fuel window (if equipped) for fuel level
  3. Open protective cap
  4. Press ignition button to test

Refilling (If Empty)

  1. Turn lighter upside down
  2. Locate refill valve on bottom
  3. Press butane canister nozzle firmly into valve
  4. Fill in short bursts (2-3 seconds)
  5. Wait 2-3 minutes before igniting

Basic Operation

Lighting

  1. Open the protective cap
  2. Press and hold the ignition button
  3. Flame ignites with piezo spark
  4. Position inverted flame toward target
  5. Release button to extinguish

Proper Technique

  • Hold lighter at natural angle
  • Let inverted design do the work
  • Don't tilt excessively
  • Keep cap open while in use

Refilling Instructions

When to Refill

  • Flame becomes weak or absent
  • Multiple clicks without ignition
  • Visible low fuel (if fuel window present)

Refilling Steps

  1. Bleed the tank: Press refill valve with small tool to release remaining gas and air
  2. Turn lighter upside down: Refill valve faces up
  3. Insert butane: Press butane canister firmly into valve
  4. Fill in bursts: 2-3 second bursts, not continuous
  5. Wait: Let lighter warm to room temperature (2-3 minutes)
  6. Test: Away from face, press ignition

Butane Tips

  • Use quality refined butane only
  • Triple-refined or better recommended
  • Impure butane clogs mechanism
  • Always bleed before refilling

Care & Maintenance

Regular Care

  • Keep cap closed when not in use
  • Wipe exterior with dry cloth
  • Don't expose to extreme heat
  • Store away from direct sunlight

Mechanism Care

  • Use only refined butane
  • Bleed tank before each refill
  • Don't overfill
  • Keep ignition area clean

Troubleshooting Poor Ignition

  1. Bleed the tank completely
  2. Refill with fresh, quality butane
  3. Wait 3 minutes before igniting
  4. If still not working, repeat bleed/fill cycle

Soft Flame vs. Torch

FeatureSoft FlameTorch
TemperatureLowerHigher
Wind resistanceLowerHigher
Fuel efficiencyHigherLower
Best forCandles, tobaccoCigars, dabbing
AppearanceTraditionalFocused jet

The Dissim Soft Flame is ideal for:

  • Candles (especially deep jars)
  • Traditional tobacco
  • General household lighting
  • Elegant presentation

Safety Information

During Use

  • Keep away from face when igniting
  • Don't inhale lighter fumes
  • Don't use near flammable gases
  • Ensure flame is extinguished after use
  • Close cap when done

Storage

  • Store in cool, dry place
  • Keep away from children
  • Don't leave in hot vehicles
  • Avoid direct sunlight storage

General Warnings

  • Pressurized container—don't puncture
  • Keep away from heat sources
  • Don't attempt to repair
  • Adult use only

Specifications

SpecificationDetail
Flame TypeSoft (inverted)
ConstructionMetal
IgnitionPiezo electric
FuelButane
RefillableYes

Related: Dissim Slim Butane Lighter Review

Troubleshooting

Q:Lighter won't ignite

A:Check fuel level—refill if empty. Ensure wick is not flooded. Try bleeding air from tank before refilling.

Q:Flame is weak or inconsistent

A:Refill with butane. Bleed air from tank. Check flame adjustment if available.

Q:Flame extinguishes in wind

A:Soft flame lighters are wind-affected. Shield flame with hand or use in calm conditions.

Specifications
TypeButane Lighter
FlameSoft Flame (Inverted)
MaterialMetal Construction
IgnitionPiezo Electric
FuelButane Gas
DesignErgonomic Slim Profile

Frequently Asked Questions

How do I turn on the Dissim Slim Butane Lighter?

Press the power button 5 times rapidly within 2 seconds. The device will vibrate or the display will illuminate to confirm it's on.

How do I charge the Dissim Slim Butane Lighter?

Connect the included charging cable to the device and a USB power source. The indicator will show charging status. Allow 1-2 hours for a full charge.

Why is my Dissim Slim Butane Lighter not working?

First, ensure the device is charged and powered on. Check all connections are secure. If using cartridges, verify the cartridge is properly seated. Try cleaning the connection points with a cotton swab.

How do I clean the Dissim Slim Butane Lighter?

Disconnect all attachments and use a dry cotton swab to clean connection points. For chambers, use isopropyl alcohol on a cotton swab when cool. Never submerge the device in liquid.

Where can I buy replacement parts for the Dissim Slim Butane Lighter?

Replacement parts and accessories are available from authorized HoneyStick retailers and the official HoneyStick website.