THEVAPERSGUIDE

HoneyStick Designer Twist Vape Pen Manual: Setup, Usage & Troubleshooting: Complete Setup & Usage Guide

Complete HoneyStick Designer Twist Vape Pen user guide with step-by-step setup instructions, voltage settings, troubleshooting tips, and maintenance advice.

By The Vaper's Guide Team
(Updated December 17, 2025)
Designer Twist Vape Pen

HoneyStick

Designer Twist Vape Pen User Manual

Quick Start Guide

  1. 1Fully charge the battery
  2. 2Attach 510 cartridge
  3. 3Twist dial to set voltage
  4. 4Turn on with 5 clicks
  5. 5Press button and inhale

Overview

The HoneyStick Designer Twist Vape Pen featured eye-catching designer patterns with a classic twist-dial voltage control system. The twist dial allowed infinite voltage adjustment between 3.3V and 4.8V.

Note: This product has been discontinued. This manual is preserved for existing owners.

What's in the Box

  • Designer Twist Vape Pen Battery
  • USB Charging Cable
  • User Manual

Getting Started

Initial Charge

  1. Connect USB cable to battery base
  2. Connect to USB power source
  3. LED indicates charging
  4. Full charge: 1-2 hours

Attaching a Cartridge

  1. Ensure battery is off
  2. Screw cartridge onto 510 threading
  3. Turn clockwise until snug
  4. Do not overtighten

Powering On/Off

  • Turn On: Click button 5 times rapidly
  • Turn Off: Click button 5 times rapidly
  • LED flashes to confirm

Twist Voltage Control

How the Twist Dial Works

The bottom of the battery features a rotating dial:

  • Turn clockwise to increase voltage
  • Turn counter-clockwise to decrease voltage
  • Range: 3.3V to 4.8V
  • Markings indicate approximate voltage

Setting Your Voltage

  1. Look at the dial markings
  2. Turn to desired voltage position
  3. Lower = more flavor, less vapor
  4. Higher = more vapor, less flavor

Voltage Guidelines

Voltage RangeEffect
3.3V - 3.6VMaximum flavor, light vapor
3.7V - 4.2VBalanced performance
4.3V - 4.8VMaximum vapor, intense
  • Live Resin: 3.3V - 3.6V
  • Standard Distillate: 3.7V - 4.0V
  • Thick Concentrates: 4.0V - 4.8V

Preheat Function

Activating Preheat

  1. With battery on, double-click the button
  2. LED indicates preheat is active
  3. Device warms at low temperature
  4. Take your draw after preheat completes

When to Preheat

  • Cold weather
  • Thick oils
  • Cartridges sitting unused
  • First draw of the day

Usage Instructions

Basic Operation

  1. Turn on (5 clicks)
  2. Set voltage with twist dial
  3. Press and hold button
  4. Inhale while holding button
  5. Release button when done

Tips for Best Results

  • Start at lower voltage
  • Increase gradually until satisfied
  • Adjust for different cartridges
  • Use preheat for stubborn oils

Charging

How to Charge

  1. Connect USB cable to base
  2. Connect to power source
  3. LED indicates charging
  4. Full charge: 1-2 hours

Battery Life

350mAh capacity provides:

  • 100-150 puffs per charge
  • Light users: 2-3 days
  • Moderate users: 1-2 days
  • Heavy users: Daily charging

Care & Maintenance

Cleaning

  • Wipe 510 connection weekly
  • Clean exterior with soft cloth
  • Keep twist dial free of debris

Storage

  • Store upright
  • Keep at room temperature
  • Remove cartridge for long-term storage

Safety Information

  • Keep away from children and pets
  • Do not use if damaged
  • Stop use if device overheats
  • Adult use only (21+)
  • Dispose of batteries properly

Troubleshooting

No Vapor

  1. Check battery is on
  2. Verify cartridge connection
  3. Increase voltage
  4. Check cartridge oil level
  5. Clean connections

Harsh Vapor

  1. Lower voltage setting
  2. Take shorter draws
  3. Check cartridge compatibility

Weak Vapor

  1. Increase voltage
  2. Charge battery
  3. Check cartridge level
  4. Use preheat

Specifications

SpecificationValue
Battery Capacity350mAh
Voltage Range3.3V - 4.8V
Voltage ControlTwist dial
Threading510
ChargingUSB
ActivationButton

Product Status

This product has been discontinued by HoneyStick. For current options, visit the HoneyStick brand page.

Related: Read our Designer Twist Vape Pen Review for detailed insights.

Troubleshooting

Q:Twist dial not changing voltage

A:The dial rotates 360° but voltage changes within a limited range. Turn slowly and note the markings.

Q:Harsh vapor

A:Turn the twist dial to lower voltage. Start at 3.3V and increase gradually.

Q:Weak vapor at low voltage

A:Increase voltage using the twist dial. Some cartridges require higher power.

Specifications
Battery Capacity350mAh
Voltage Range3.3V - 4.8V
Voltage ControlTwist dial
PreheatYes
ChargingUSB
Threading510 Thread
StatusDiscontinued

Frequently Asked Questions

How do I know what voltage I'm at?

The twist dial has markings indicating approximate voltage. Turn to the desired position.

What's the preheat function?

Double-click the button to activate a low-temperature preheat cycle for thick oils.

Is the dial infinitely adjustable?

Yes, you can set any voltage between 3.3V and 4.8V, not just preset levels.